Maintenance of AG230 Aerosol Generator

 News     |      2019-01-23 10:50
AG230 aerosol generator doesnot need any power supply,but needs compress air and PAO oils. It is important to follow routine operation maintenance as below:

 1, Drain the compressed air filter/regulator daily, or more often, if required.
 
  2, If clean, dry, compressed air is used with this unit, little maintenance should be  required.
 
  3, Drain the compressed air filter/regulator daily, or more often, if required.
 
  4, Yearly, under daily operation, drain all liquid and flush with a solvent to remove any residue from the unit.
 
  5,When not in use, in order to prevent the dust from entering generator, please cover the generator.
 
 Note : Before transportation 
 
  6,Drain all liquid from unit.And verify that the LIQUID FILL cap is tight
 
  7,Stuff aerosol outlet flange with liquid-absorbing cloth or paper to prevent residue  from damaging shipping container.
 
  8,Tape or plug the compressed air inlet on air filter/regulator to prevent internal  damage by foreign material.